Tag Archives: hdpe

HDPE as a cutting board

Next occasion you’re going to be cutting fresh vegetables against your chopping board, make time and check out it, the material most likely to be used as a High Density Polyethylene Cutting Board – Sheets cutting board is Polyethylene. Given it should be FDA and NSF approved and even stain, moisture and odor resistant, Polyethylene is the best choice for chopping boards.

Several other cutting boards made of wood are prone to bacteria and strong odors simply because they lack the desiredproperties that Polyethylene sheets offer, for instance its non porous work surface, chemical resistance and approval for food contact. HD Polyethylene is certainly a durable and lighter weight material that comes in several forms and is ideal for a wide range of applications. You can find several varieties of Polyethylene commercially accessible. The most prevalent are HDPE (High Density Polyethylene), LD Polyethylene, and UHMW (Ultra High Molecular Weight Polyethylene). The difference has to do with the molecular weight and branching;  which happens when a monomer or atom is replaced by a longer chain of polymers (a long repeating chain of atoms).  

{plastic-cutting-board-500x500.jpg|chopping-board-econocut-partwell-(600x315-ffffff).jpg?v=433ad227|kucb012.jpg|1283654729765_hz-myalibaba-temp14_3796.JPG|royal-industries-roy-cb-182434-24-x-18-heavy-duty-plastic-cutting-board_4631539.jpg

The High Density happens to be used for gallon sized milk jugs and food containers. Low Density is often used for bottles as well as plastic bags. UHMW, which has higher molecular weight (2-6 million) allowing for an even transfer over the length of material which makes it stronger, which makes it useful with regard to bearing products because of the great wear resistance. Frequently used in the food processing and dairy industry, UHMW Polyethylene is a great replacement for numerous industrial materials along with a great means to many wear issues.   Every one of those polymers are produced from the same polyolefin plastic materials family, but all have certain properties that make them just a little different. HDPE provides great chemical resistance, has exceptional impact strength and great energy absorption. LDPE has lots of of the same properties as High Density yet it’s not as dense at 9.15, as an alternative to HDPE which happens to be 9.34, and it’s a softer material ( one gallon coffee can lids). It additionally has a lower tensile strength plus much better, more convenient formability.
UHMW is a strong material that features great durability and low co-efficient of friction making it an ideal for sliding applications. Dupont makes the plastic material with a lower co-efficient of friction is Polytetrafluoroethylene – PTFE; which has a higher temperature and chemical resistance. Ultra High Molecular Weight Polyethylene provides a range of material products and properties,  and all these products possess extraordinary durability that can be worthwhile for several applications. From the food industry to automotive, your kitchen and also the warehouse, whatever your Polyethylene needs are – High Density, Low Denseness as well as UHMW, Polyethylene is a great option. Email us to acquire more information on these or other plastic sheet or rod materials.

plastic sheets

HD Polyethylene as a cutting board

On your next occasion you find yourself cutting green vegetables on the chopping board, make time and check out it, the material most likely to be used as a High Density Polyethylene Cutting Board Material – Sheets cutting board is Polyethylene. Given that it should be FDA and National Sanitation Foundation approved along with stain, moisture and odor resistant, Polyethylene is the perfect choice for cutting boards.

Different cutting boards created from wood are prone to bacteria and residual odors for the reason that lack the desiredproperties that Polyethylene sheets offer, like its non permeable work surface, chemical resistance and approval for food contact. Polyethylene is an extremely durable and light-weight material that comes in a great many forms and is well suited for a range of applications. There are numerous types of Polyethylene commercially available. The most typical are HDPE (High Density Polyethylene), LDPE, and UHMW (Ultra High Molecular Weight Polyethylene). The only difference has to do with the molecular weight and branching;  this occurs when a monomer or atom is replaced by a longer chain of polymers (an excessively long repeating chain of atoms).  

{plastic-cutting-board-500x500.jpg|chopping-board-econocut-partwell-(600x315-ffffff).jpg?v=433ad227|kucb012.jpg|1283654729765_hz-myalibaba-temp14_3796.JPG|royal-industries-roy-cb-182434-24-x-18-heavy-duty-plastic-cutting-board_4631539.jpg

The High Density Polyethylene is commonly used for gallon sized milk jugs and food containers. Low Density is typically used for food containers and plastic bags. UHMW, which has higher molecular weight (2-6 million) that enables for an even transfer over the length of material which makes it stronger, making it able to be used with regard to bearing products due to its great wear resistance. Regularly employed in the food processing and dairy industry, UHMW Polyethylene is a fantastic replacement for a great many other industrial materials and also a great means to many wear issues.   Most of these polymers are produced from the same polyolefin plastics family, but all have certain properties that make them just a little different. HDPE provides great chemical resistance, with high impact strength and great energy absorption. LDPE has lots of of the same properties as High Density yet it’s not as dense at 9.15, whereas HDPE which is 9.34, in fact it is a softer material ( one gallon coffee can lids). Furthermore has a lower tensile strength along with greater, a lot easier heat forming.
UHMW is actually a strong material that has got great durability and low co-efficient of friction rendering it an ideal for sliding applications. Dupont makes the plastic material with a lower co-efficient of friction is Dupont Teflon – PTFE; which has a higher temperature and chemical resistance. UHMW Polyethylene delivers a wide variety of material alternatives and properties,  and all these products include exceptional longevity that could be best with a variety of applications. From the food industry to automotive, the kitchen or maybe the warehouse, whatever your Polyethylene needs are – High Density, Low Denseness or UHMW, Polyethylene is a brilliant decision. Phone us to acquire more information on these as well as other plastic plate or bar.

learn about plastic

Food safe HDPE plastic better than glass

In it’s simplest terms, the principle difference between the different types of plastic is the way in which their cellular structure, or molecules attachment with each other, and the course tightly they’re formed.

1) Low Density Polyethylene( LDPE ), commonest type of plastic sheeting, very flexible, most often from 0.5 mil thick to about 40 mil in flexible sheeting figures. Good conformability to surfaces. Because the cell construction is just not as strong or dense as another sorts of plastic sheeting, “its not” generally as strong or puncture resistant as different forms or combinations, nonetheless has thousands of widespread employs. Extensively used for all the fragments from build and agricultural sheeting( generally called Visqueen ), Engineered Plastic Sheeting of several sorts for things like Vapor Retarders( additionally called Vapor Obstacles by many ), Floor Safety movies, Pond and Canal Liners, Covers, Tarps, Abatement Plastic, Containment, package, and the directory goes on.

2) Linear Low Density Polyethylene( LLDPE ), mixed form of LDPE the place the movie has mode greater flexibility, tensile strength, and more conformability. LLDPE is “softer” and extra pliant, so is a wonderful select for such things as pond liners, or blended into other movies to provide them extra strength and flexibility. This is perfect for an application like a self-adhesive carpet safety film, where the movie must have an astounding sum of strength in a really thin cinema to soak up wallops, however not tear or puncture. On this form of poly, the molecules all line up and strongly hold together as the movie is unfolded to present such structures far more ability and elongation than LDPE. Most common in thick film starting from 0.5 mil to 40 mil in flexible plastic sheeting.

3) Medium Density Polyethylene( MDPE ), the least generally used type of polyethylene for versatile plastic sheeting. Has extra vigour than LDPE, somewhat extra chemical resist, tighter cell structure, extra puncture and tear resist. Often blended with LDPE and or LLDPE to give the attributes one is looking for in a specific kind of film. For instance, many pond liners have MDPE to lend some strength and toughness, with out including an excess sum of stiffness.

4) High Density Polyethylene( HDPE, aka HD ), extensively be useful for many applications. HDPE is the strongest, toughest, most chemical resistant, and least versatile of these four assortments of polyethylene. It additionally has the most UV resistance of the bunch without additive bundles to widen this attribute. HDPE has a very tight cell structure, stirring it very difficult for other molecules to go by means of its formation on a microscopic tier. HDPE is essentially the most easily discipline seamed of those product, and is generally used on an industrial degree in thin film from about 12 mil to a hundred mil Thick plastic sheets. Most golf course ponds are lined with HDPE, most industrial ponds and canal liners, secondary containment liners, root roadblocks, many operates the place chemical resist is needed. This is additionally utilized in   1000′ s or maybe hundreds of roles in thinner assortments, especially in blends with the opposite different forms of polyethylene, because the HDPE provides a lot vigor and toughness with its very tight bonds with various molecules.

The density of polyethylene is measured in a column of water, and they’re all categorized relying on assortments of concentration. LDPE( and LLDPE) are generally throughout the range of 0.919 -0.924 g/ cm3. MDPE are generally throughout the range of 0.926 -0.940 g/ cm3. HDPE are typically inside the vary of 0.941 -0.965 g/ cm3. These numerals can differ scarcely depending in your informant, and are typically not set in stone, merely general guidelines.

HDPE cutting board

High Density Polyethylene as a FDA approved cutting board

The next time are going to be slicing green veggies upon your cutting board, take a moment and look at it, the material most likely to be used as a HDPE Polyethylene Cut Grade Material – Sheets cutting board is Polyethylene. Because it is normally FDA and National Sanitation Foundation approved along with stain, moisture and odor resistant, Polyethylene is the perfect choice for slicing boards.

Other types of cutting boards cut from wood are prone to bacteria and pungent odors given that they lack the desiredproperties that Polyethylene sheets offer, including its non permeable work surface, chemical substance resistance and approval for food contact. Polyethylene certainly a durable and lightweight material that comes in several forms and is great for a range of applications. You can find several varieties of Polyethylene commercially accessible. The most widespread are HDPE (High Density Polyethylene), Low Density Polyethylene, and UHMW (Ultra High Molecular Weight Polyethylene). The the main difference has to do with the molecular weight and branching;  which is when a monomer or atom is replaced by a longer chain of polymers (an excessively long repeating chain of atoms).  

{plastic-cutting-board-500x500.jpg|chopping-board-econocut-partwell-(600x315-ffffff).jpg?v=433ad227|kucb012.jpg|1283654729765_hz-myalibaba-temp14_3796.JPG|royal-industries-roy-cb-182434-24-x-18-heavy-duty-plastic-cutting-board_4631539.jpg

The High Density Polyethylene is normally used for the one gallon milk jugs and glad food storage containers. Low Density is typically used for water bottles as well as plastic sandwich bags. UHMW, which has higher molecular weight (2-6 million) that allows for an even transfer over the length of material which makes it stronger, making it able to be used for bearing products for the great wear resistance. Often employed in the food processing and dairy industry, UHMW is a brilliant replacement for many other industrial materials as well as a great solution to many wear issues.   Every one of those polymers are derived from the same polyolefin plastic family, but they all have certain properties that make them a little different. HDPE provides great chemical resistance, with higher impact strength and great energy absorption. LDPE has lots of of the same properties as High Density however it’s not as dense at 9.15, opposed to HDPE which happens to be 9.34, plus its a softer material ( the soft coffee can lids). What’s more , has a lower tensile strength and also far better, quite a bit easier heat forming.
UHMW is known as a strong material that has got great durability and low co-efficient of friction rendering it an ideal for sliding applications. Dupont makes the plastic material with a lower co-efficient of friction is Dupont Teflon – PTFE; which has a higher temperature and chemical resistance. UHMW Polyethylene gives the wide range of material products and properties,  and most of these products have excellent longevity which really can be worthy of numerous applications. From the food industry to automotive, the kitchen or maybe the warehouse, whatever your Polyethylene needs are – High Density, Low Denseness as well as UHMW, Polyethylene is really a good choice. Phone us to acquire more information on these and other plastic semi-finished materials.

plastic sheet

HDPE as a FDA approved cutting board

On your next occasion are going to be slicing fruits and vegetables upon your chopping board, take the time and check out it, the material most likely to be used as a HDPE Polyethylene Cut Grade Material – Sheets cutting board is Polyethylene. Simply because it should be FDA and National Sanitation Foundation approved along with stain, moisture and odor resistant, Polyethylene is the best choice for cutting boards.

A variety of other cutting boards made out of wood are susceptible to bacteria and odors for the reason that lack the desirableproperties that Polyethylene sheets offer, such as its non porous surface, chemical resistance and approval for food contact. High Density Polyethylene is certainly an durable and lightweight material that comes in numerous forms and is perfect for a range of applications. You can find several varieties of Polyethylene commercially available. The commonest are HDPE (High Density Polyethylene), Low Density Polyethylene, and UHMW (Ultra High Molecular Weight Polyethylene). The only difference has to do with the molecular weight and branching;  this occurs when a monomer or atom is replaced by a longer chain of polymers (a long repeating chain of atoms).  

{plastic-cutting-board-500x500.jpg|chopping-board-econocut-partwell-(600x315-ffffff).jpg?v=433ad227|kucb012.jpg|1283654729765_hz-myalibaba-temp14_3796.JPG|royal-industries-roy-cb-182434-24-x-18-heavy-duty-plastic-cutting-board_4631539.jpg

The High Density Polyethylene is frequently used for the one gallon milk jugs and Tupperware style food containers. Low Density happens to be used for milky colored bottles in addition to plastic bags. UHMW, which has higher molecular weight (2-6 million) which enables for an even transfer over the length of material which makes it stronger, allowing it to be useful with regard to bearing job applications due to the great wear resistance. Used often in the food processing and dairy industry, UHMW Polyethylene is a wonderful replacement for numerous industrial materials and a fantastic resolution to many wear issues.   Most of these polymers are made from the same polyolefin plastic materials family, but all have certain properties that make them a little different. HDPE provides great chemical resistance, has exceptional impact strength and great energy absorption. Low Density has several of the same properties as High Density however it is not as dense at 9.15, instead of HDPE which is 9.34, and it’s a softer material ( the soft coffee can lids). Furthermore has a lower tensile strength along with superior, more convenient forming.
UHMW is a strong material that’s great durability and low co-efficient of friction making it an ideal for sliding applications. Dupont makes the plastic material with a lower co-efficient of friction is Dupont Teflon – PTFE; which has a higher temperature and chemical resistance. The UHMW Polyethylene gives the wide range of material selections and properties,  and most of these products have got exceptional durability which can be fitted to a number of applications. From the food industry to automotive, your home as well as warehouse, whatever your Polyethylene needs are – High Density, Low Denseness or perhaps UHMW, Polyethylene is a wonderful choice. E mail us to acquire more information on these and also other plastic raw materials.

plasticsheet