Roofing And You- Inspecting Your Roof

A verbal report of good or bad quality work is your most reliable source. Big and expensive advertising isn’t necessarily a bad thing, but it isn’t the end all for telling you the important stuff about a roofer. After finding a few names from friends and neighbors call several companies to obtain a bid. Make sure the roofer comes out to inspect your roof and to discuss recommendations with you in person. Never accept a bid over the phone that is simply based on square footage of the home. Once you have multiple bids you can compare them against each other. In many cases, bids will include differing amounts of services and items offered. Some bids may include the price strictly for the cost of the materials and labor, not mentioning any additional haul-away or warranty fees. Remember that you aren’t always comparing apples to apples. Last, be sure that the roofer you decide to use can provide you with the proper documentation before they begin work on the home.

Overlapping the strips of felt is absolutely essential to ensuring a watertight seal. Since the primary purpose of roofing felt is to keep moisture from getting into your home, you definitely need to overlap the strips during installation. Another easy, but often overlooked, aspect of installing roofing felt is to smooth out each strip after it is placed down. You don’t want to leave air, leaves, nails, or anything else underneath the felt, as this can lead to damage to the sheathing or the felt itself. Smoothing may be tedious, but it is definitely necessary. A dry sheathing is essential to properly installed roofing felt. If the sheathing is wet for any reason, make sure to let it dry before you start installing the felt. It’s crucial to ensure that moisture or water doesn’t get caught underneath the roofing felt. This could damage the sheathing or the felt, leading to future complications. Sometimes you may need to wait for days for the sheathing to dry completely. This may be annoying, but it’s essential.

There are many roofing materials in the market nowadays. Just try to shop around and you will see these materials in different colors and shapes. Here are the five of the most common roofing materials today. Metal roofing is one of the most popular materials. It is known for its strength that can last a lifetime. It is also fire resistant and is used in most residential and commercial properties. Because of its versatility and reasonable price, the popularity of metal roofing led to the variety of colors and styles with this material. It is one of the materials with the most diverse options in the industry right now. Tiles are also a popular choice as a material for the roof. Tiles are also fireproof and are very durable. It also comes in many different colors and styles. Asphalt shingles are very popular for several decades now. The traditional asphalt shingles are very common roofing materials for 70 years now. But the modern fiberglass shingles are now substituting the asphalt version.

Thatch is far more susceptible to fire than other kinds of roofing materials. Even wood is more fire resistant than thatch. Slate is a tremendously strong natural roofing product. It can last for several decades before needing to be replaced. As it’s a light material it really is easier to work with then other supplies. A concrete roof of comparable design will be much heavier. A slate roof is likewise thin enough to be effortlessly worked and formed to cover unusual shaped areas. An even less expensive and lighter weight solution is modern metal roofing materials, however they are not as visually pleasing as slate. A key problem with slate as a roofing material is the expense of installing it to start with. A comparison of roofing costs will reveal that metal is more affordable, and this can be the determining factor in a building which is built to be functional, or in a home where the contractor expects to live. If you’re just searching for a functional location to live the selling point of slate roofs enduring for decades might not be considered. Using steel in roofing is on the increase and some of the new combinations of metals are demonstrating to be fairly valuable. Galvanized steel, which was common due to its low cost and the ability to last for a number of years, is now being slowly replaced by steel covered with alloy material. The mix of aluminum and zinc is proving to be affordable and successful. Picking out materials for a roof is quicker any time the longest lasting material is also one of the most cost-effective, and that is where these metal combinations are taking us. With the rapid improvement of the sealing operations, even cheaper more strong roofing is in the future.

Asphalt Shingles – This is one of the most cost-effective and common options for residential roofs. They are considered the least attractive, and do not last as long as other roofing materials, but they are made of natural materials, making them perfectly eco-friendly. Metal – Metal is 100% recyclable, and can be reprocessed over and over again. Recycling metal lowers the need to mine more, reducing natural ore deposit depletion rates. An old metal roof is still useful and valuable, and can be repurposed, endlessly. Steel and light-weight aluminum are the most common metals used for metal roofs. Slate – Slate is a natural element of the earth and highly durable. It lasts a long time, but comes with a hefty price tag. It is one of the more attractive roofing options. Slate is also 100% decomposable and recyclable. Clay – Clay tile roofs are referred to as “terra cotta” in the industry.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.